How to Assemble a Good and Correct Gaming PC With The Latest RTX Models

To get a dream PC, sometimes buying a complete PC right away so that the ready-made ones will not be suitable. Will be much more satisfied with assembling it yourself from start to finish. Starting from choosing the components, designing, and so on to becoming the desired PC.

Here are the steps for assembling a complete PC that is good and correct

Step 1

Start by installing the Processor on the motherboard. To be able to install the processor properly, you must refer to the sign in the lower left corner of the processor and socket.

Step 2

Continue with installing a CPU Cooler. The general method is to match the hole in the motherboard with the hook on the CPU cooler. Oh yes, if you use the built-in CPU cooler, you usually have thermal paste.

Step 3

If the CPU cooler is installed properly, don't forget to connect the cable to the motherboard. Usually written on the motherboard CPU_FAN.

Step 4

Continue with installing RAM. ApkVenue, it certainly won't be difficult, you just have to match it. Because if it doesn't match, it won't be installed. So there will be no inverted names and the like.

Step 5

Start disassembling the PC Case until only the frame is left. Each PC case has a different way of disassembling it, but frankly it's not that difficult.

Step 6

Attach the I / O Shield obtained from the motherboard to the back of the PC case. Make sure the position matches the position of the motherboard installed later.

Step 7

Attach the motherboard to the PC case. Just match it with the existing bolt holes. Then bolt everything that can be bolted. No need to be too tight, if it feels stuck then that's enough.

Step 8

Install the Hard Disk in the PC case. Each PC case is slightly different. Some are bolted, but some have a seat and use rails.

Step 9

Install the Power Supply Unit (PSU) on the PC case. The same as the usual method, namely by just matching it with the bolt holes.

Step 10

Plug in the motherboard power cable or so-called 24-pin ATX Power cable.

Step 11

Plug in the processor power cable or commonly called the 4-pin CPU power cable. The color is definitely yellow and black, ApkVenue is sure you will easily recognize the cable.

Step 12

In the motherboard purchase package, you will definitely get a SATA cable. Pair the cable on the motherboard. As usual, just a match. Because if it doesn't match, it certainly won't be installed.

Step 13

On the other end of the SATA cable, connect it to the hard disk.

Step 14

Because hard disks also need power. Take the SATA Power cable that comes from the PSU, then connect it to the hard disk.

Step 15

Start installing the fan on the PC case. The point is that on the front of the fan it will blow air, while on the back it will suck up air. You have to arrange it in such a way so you can get a good Air Flow.

Step 16

Start connecting the cable from the PC case to the motherboard. As usual, just a match.

Step 17

Start connecting the Front Panel cable from the PC case to the motherboard. Jaka is sure you will easily recognize the cable, because the cable is small. Don't be afraid to be wrong, because if you are wrong there will be no fatal damage.

Step 18